Sanus Systems Indoor Furnishings UF34 User Guide

the next section. To utilize the steel speaker

studs, simply thread them into the holes in the

corners of the top plates until the end protrudes

1/8inchthroughthebottom.Placeyourspeaker

on the steel speaker studs.(Photo 5) Insert the

small allen key into the bottom of each steel

speaker stud and adjust them until the speaker

is level and does not rock back and forth. Lock

in place with a machine nut. Use of the steel

speakerstudsisoptional.*TheRubberPadsare

PHOTO 5

ULTIMATE FOUNDATIONS®

INSTRUCTION MANUAL

provided as an alternative and may be placed in the corners of the top plates.

Simply twist the pads into the holes in the corners of each top plate.

6] A number of manfacturers are providing threaded inserts on the bottom

of their speakers for the new Foundation Mount™ system. The Foundation

Mount™ system allows you to bolt your speaker to the top plate using the

speaker bolts and the remaining allen key provided. This system provides

signiﬁcant safety beneﬁts when used in earthquake areas or around pets and

children. It also offers maximum resonance damping characteristics. The

rubber pads should be sandwiched between the top plate and the speaker to

provide superior damping and prevent damage to the speaker. Do not use the

steel speaker studs when bolt mounting.

*NOTE: The ends of the spiked feet and steel speaker studs are very sharp

and may scratch ﬂoors or furniture. All sharp objects can be hazardous to

children. For this reason rubber pads are provided as an option. The decision

to use spiked feet and/or speaker studs is yours; Sanus Systems will not be

liable for damage or injury.

Every effort has been made to ensure that your stands are per-

fect. If you have any questions or feel that there is a problem of

any kind, please contact SanusCustomer Support. We can assist

with questions or damaged/missing parts.

Page 1