Rheem Water Heater CMR50245 User Guide

MARATHON  
Residential Electric Water Heaters  
Available in 40 and 60 Imperial Gallon Electric Models  
Lifetime Limited Tank Warranty*  
5 Year Limited Parts Warranty*  
The seamless, blow-molded, polybutylene  
tank is impervious to rust and corrosion  
Multiple layers of filament wound fiberglass  
give the tank unmatched strength  
The tank is designed, built and warranted  
not to leak “for as long as you own your  
home”  
Envirofoam insulation is free of ozone  
depleting CFC’s and HCFC’s so it saves  
the planet and it saves energy  
Pipe wrap energy kit included to reduce  
heat loss from plumbing lines  
Factory installed temperature and pressure  
relief valve for greater value and security  
Conduit between control boxes facilitates  
wiring for “off-peak” use  
All plastic tank eliminates the need for an  
anode rod – preventing potential odor  
problems  
C191.1 CSA Energy Efficiency  
*See Residential Warranty Information Brochure for  
complete warranty information.  
Recessed drain valve is out of the way of  
brooms and scrubbers  
Tough molded outer shell resists dents and  
scratches  
TANK CAPACITY  
ELEMENT  
ROUGHING IN DIMENSIONS (SHOWN IN INCHES)  
SHIPPING WEIGHT  
TANK  
HEIGHT  
A
HEIGHT TO  
WATER CONN.  
B
IMPERIAL  
WATTAGE  
DIAMETER  
C
MODEL NUMBER  
CMR50245  
CMR75245  
GALLONS  
LITRES  
@ 240 VOLTS  
AMPERAGE  
18.75  
LBS.  
103  
127  
KG  
40  
180  
4500/4500  
4500/4500  
62-3/4  
58-1/2  
66-3/4  
62-1/2  
23-1/2  
28-1/4  
46.7  
57.6  
60  
270  
18.75  
CONSTRUCTION FEATURES  
1. Energy Saving Pipe Wrap Kit – reduces heat loss through plumbing  
lines.  
2. Temperature and Pressure Relief Valve – factory installed.  
3. Water Tight Grommets – keep out overhead moisture and condensation.  
4. Seamless Molded Non-metallic Inner Tank – can’t rust or corrode.  
5-3/4"  
5. Fill Tube – high temperature material to withstand thermal storage and  
C
other high temperature applications.  
6. High-tech Heating Elements – upper element fused to protect tank  
against “dry fire”. Bottom element low watt, stainless steel for long life.  
7. Polyethylene Outer Jacket – resists dents and scratches during transit,  
installation and beyond.  
8. Envirofoam™ a great energy saver and friendly to the ozone layer.  
It’s made without CFC’s and HCFC’s.  
9. Fiberglass Tank – has unmatched strength.  
A B  
10. Recessed Drain Valve – protected from damage.  
Your Marathon is warranted not to leak for as long as you own your home*…  
The Marathon offers this no-leak promise because of its superior, non-metallic PermaGuard  
tank construction…A seamless blow molded polybutylene inner tank with a filament wound  
fiberglass outer tank for maximum strength. Superior performance, high-efficiency and low  
operating cost…for a lifetime*!  
*See Residential Warranty Information Brochure at your dealer for complete warranty information.  
In keeping with its policy of continuous progress and product improvement, Rheem reserves the right to make changes without notice.  
EST. 1947  
Rheem Manufacturing Company • Water Heater Division  
Rheem Canada Ltd.,128 Barton Street West, Hamilton, Ontario L8N 3P3  
Customer Service 1-800-268-6966  
RHEEM  
CANADA  
LTD/LTÉE  
THANKS TO OUR EMPLOYEES  
WE ARE  
Warranty  
1-800-263-8342  
ISO9002  
REGISTERED  
FORM NO. 101-42CAN Rev.1  
09/05 WP  
 

PYLE Audio Stereo Amplifier PCA1 User Guide
QSC Audio Speaker EB2082 I User Guide
Radio Shack Baby Toy 60 479 User Guide
Radio Shack Mouse 26 234 User Guide
Rangemaster Cooktop RGG77 User Guide
Rotel Cassette Player RD 1001 User Guide
Ryobi Saw CSB123 User Guide
Samsung DVD Player DVD C360 User Guide
Samsung Microwave Oven G2618C User Guide
Sanyo Microwave Oven EM S7579W User Guide